Usage

1.Prepare the Brows

Complete a patch test before proceeding.

Ensure the brow area is clean, dry, and free from makeup or oil.

Use an oil-free cleanser to remove any residue, then pat dry with a cotton pad.

2. Identify Key Points

Cut a section of Black or White Charcoal Mapping Thread. Use the nose as a guide to find the following key brow points of each brow: 

Create Point 1, the Head of Brow – Use the side of the nose as an anchor point, holding the thread taught and press the thread vertically to the head of the brow. 

Create Point 2, the Arch of Brow – Keeping this same anchor point, holding the thread taught, position the thread horizontally through the pupil, marking the arch of the brow. 

Create Point 3, the Tail of Brow – Extend from the outer corner of the eye, holding the thread taught, marking the tail of the brow.

3. Connect the points of each brow

Hold the mapping thread taut and carefully connect the top of Point 1-to-2, then Point 2-3, repeat on lower Points. Use this outline as your brow blueprint.

Item Code

I-078059